iLO 5 Channel Interface Driver for Windows Server 2016
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Driver - System Management
Version:
4.3.0.0(26 Jun 2018)
Operating System(s):
Microsoft Windows Server 2016
Multi-part download
File name:
cp034071.compsig (2.0 KB)
File name:
cp034071.exe (732 KB)
The iLO 5 Channel Interface Driver allows software to communicate with the iLO 5 management controller. This driver is used by the Agentless Management Service, firmware flash components, and other utilities.
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.
To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:
Reboot Requirement: Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Place the Smart Component in a temporary directory, then double-click it to run.
Select 'Install' to start extracting to a temporary location on the hard drive.
Click the 'Install' button to perform the driver installation.
End User License Agreements: HPE Software License Agreement v1 Hewlett-Packard End User License Agreement
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Version:4.5.0.0 (9 Sep 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.
Version:4.3.0.0(B) (27 Nov 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for Windows Server 2019
Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10
Version:4.3.0.0 (26 Jun 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.
Version:4.1.0.0(B) (5 Feb 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component no longer installs a null driver on iLO 5 PCI function 0. Support for that function is now provided by the iLO 5 Automatic Server Recovery Driver.
Version:4.1.0.0 (20 Nov 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.
Version:4.0.0.0 (12 Jul 2017)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release.
Type:
Driver - System Management
Version:
4.3.0.0(26 Jun 2018)
Operating System(s):
Microsoft Windows Server 2016
Description
The iLO 5 Channel Interface Driver allows software to communicate with the iLO 5 management controller. This driver is used by the Agentless Management Service, firmware flash components, and other utilities.
Enhancements
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.
Installation Instructions
To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:
Reboot Requirement: Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Installation:
Place the Smart Component in a temporary directory, then double-click it to run.
Select 'Install' to start extracting to a temporary location on the hard drive.
Click the 'Install' button to perform the driver installation.
Release Notes
End User License Agreements: HPE Software License Agreement v1 Hewlett-Packard End User License Agreement
Upgrade Requirement: OptionalNeed for speed 1 download. - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Revision History
Version:4.5.0.0 (9 Sep 2019)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.
Version:4.3.0.0(B) (27 Nov 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Added support for Windows Server 2019
Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10
Version:4.3.0.0 (26 Jun 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.
Version:4.1.0.0(B) (5 Feb 2018)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
This component no longer installs a null driver on iLO 5 PCI function 0. Support for that function is now provided by the iLO 5 Automatic Server Recovery Driver.
Version:4.1.0.0 (20 Nov 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.
Version:4.0.0.0 (12 Jul 2017)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release.
Download Ilo Drivers
You'll have to use the Windows Server 2008 R2 drivers from the support page and hope they work on W7. I think the Base System Device needs the HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008/2012 X64, or the HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64 driver. I'm pretty sure it is one of those 2. Software For Ilo Mp3 Player. Download32 is source for software for ilo mp3 player shareware, freeware download - PodSweat, MAS53x9 MP3 Player Linux Driver, AVR Butterfly MP3 Player, ALON MP3 Player for S60, ALON MP3 Player SE for UIQ, etc.
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
Printable version
* RECOMMENDED * HP Lights-Out Stand Alone Remote Console for Windows
By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
Type:
Software - Lights-Out Management
Version:
1.2.3.0(24 Jul 2014)
Operating System(s):
Microsoft Windows 7 (64-bit)
Microsoft Windows 7 Enterprise (32-bit)
Microsoft Windows 7 Enterprise (64-bit)
Microsoft Windows 7 Professional (32-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Vista (32-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional
Microsoft Windows 7 (32-bit)
File name:
Setup.exe (594 KB)
The HP Lights-Out Console (HPLOCONS) provides the full iLO Integrated Remote Console (IRC) experience directly from your Windows desktop without going through the iLO web-based user interface. With the HP Lights-Out Console (sometimes called the Stand-Alone Remote Console) you can access your server’s remote console with one click of the mouse. HPLOCONS has the same functionality as the IRC application that is launched directly from an iLO 3 or iLO 4’s web server.
Added support for .NET Framework v4.0 and v4.5.
Added support for Simplified Chinese.
Added Offline Mode to allow local video playback without connecting to iLO.
Added “Caps Lock” entry to the Keyboard menu to allow synchronizing the Caps Lock keys between the client and remote server.
Added the Server Name, iLO FQDN, Enclosure name, and Bay number to the application title bar.
Added support for IPv6. Note: IPv6 support requires iLO 3 v1.50, iLO 4 v1.20 or later.
Prerequisites:
This utility requires the following minimum firmware/configuration revisions:
HP ProLiant or Integrity server with iLO 3
iLO 3 firmware v1.15 or later
To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:
258424d77a20d860511e31904252e18a
Setup.exe
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation: Download this SoftPaq onto your hard-drive. Execute it from within Windows.
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Notes:
User guides, white papers and other documentation are available at: http://www.hp.com/servers/lights-out.
For additional information, check online help files about how to use features.
Online help files can be accessed from within the browser web pages by clicking on the question mark in the upper right-hand corner of each page.
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Session key is visible during Remote Console session initialization.
Customizing regional options can cause the application to stop working.
Application times out during video recording.
Startup and Pre-failure videos show no video in some instances.
Mounting a USB key that is labeled as “F:” drive causes the application to stop working.
High memory usage when virtual media runs for a long time.
Virtual media may disconnect unexpectedly.
Application occasionally stops working when the Share or Acquire dialog is closed.
The application becomes unresponsive after dismounting image file while server is rebooting.
Virtual USB key is not completely disconnected when the physical USB key is unplugged.
High CPU usage when local playback is paused.
Version:1.3.3 (28 Sep 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Updated to support HPE Gen10 Servers.
Version:1.3.1 (11 Dec 2015)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
This release fixes the following issues:
The IRC does not work correctly in .NET 3.5 without SP1.
The IRC might stop working when a virtual media URL is too long.
The IRC freezes when you access a video file that is in use.
This release includes the following enhancements:
Support for TLS 1.1 and TLS 1.2. Note: TLS 1.1 and TLS 1.2 require Windows 7 or later and .NET framework version 4.5 or later.
Enhanced security for communication between iLO and the IRC.
Japanese 101 keyboard support.
Improved the way that the IRC is closed due to an iLO reset or firmware update.
Improved handling of remote console sharing.
Version:1.2.3.0 (24 Jul 2014)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Session key is visible during Remote Console session initialization.
Customizing regional options can cause the application to stop working.
Application times out during video recording.
Startup and Pre-failure videos show no video in some instances.
Mounting a USB key that is labeled as “F:” drive causes the application to stop working.
High memory usage when virtual media runs for a long time.
Virtual media may disconnect unexpectedly.
Application occasionally stops working when the Share or Acquire dialog is closed.
The application becomes unresponsive after dismounting image file while server is rebooting.
Virtual USB key is not completely disconnected when the physical USB key is unplugged.
High CPU usage when local playback is paused.
Added support for .NET Framework v4.0 and v4.5.
Added support for Simplified Chinese.
Added Offline Mode to allow local video playback without connecting to iLO.
Added “Caps Lock” entry to the Keyboard menu to allow synchronizing the Caps Lock keys between the client and remote server.
Added the Server Name, iLO FQDN, Enclosure name, and Bay number to the application title bar.
Added support for IPv6. Note: IPv6 support requires iLO 3 v1.50, iLO 4 v1.20 or later.
Version:1.1.2.0 (7 Apr 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release.
Type:
Software - Lights-Out Management
Version:
1.2.3.0(24 Jul 2014)
Operating System(s):
Microsoft Windows 7 (32-bit)
Microsoft Windows 7 (64-bit)
Microsoft Windows 7 Enterprise (32-bit)
Microsoft Windows 7 Enterprise (64-bit)
Microsoft Windows 7 Professional (32-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Vista (32-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional
Description
The HP Lights-Out Console (HPLOCONS) provides the full iLO Integrated Remote Console (IRC) experience directly from your Windows desktop without going through the iLO web-based user interface. With the HP Lights-Out Console (sometimes called the Stand-Alone Remote Console) you can access your server’s remote console with one click of the mouse. HPLOCONS has the same functionality as the IRC application that is launched directly from an iLO 3 or iLO 4’s web server.
Enhancements
Added support for .NET Framework v4.0 and v4.5.
Added support for Simplified Chinese.
Added Offline Mode to allow local video playback without connecting to iLO.
Added “Caps Lock” entry to the Keyboard menu to allow synchronizing the Caps Lock keys between the client and remote server.
Added the Server Name, iLO FQDN, Enclosure name, and Bay number to the application title bar.
Added support for IPv6. Note: IPv6 support requires iLO 3 v1.50, iLO 4 v1.20 or later.
Installation Instructions
Prerequisites:
This utility requires the following minimum firmware/configuration revisions:
HP ProLiant or Integrity server with iLO 3
iLO 3 firmware v1.15 or later
To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:
258424d77a20d860511e31904252e18a
Setup.exe
Reboot Requirement: Reboot is not required after installation for updates to take effect and hardware stability to be maintained.
Installation: Download this SoftPaq onto your hard-drive. Execute it from within Windows.
Release Notes
End User License Agreements: Hewlett-Packard End User License Agreement
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Notes:
User guides, white papers and other documentation are available at: http://www.hp.com/servers/lights-out.
For additional information, check online help files about how to use features.
Online help files can be accessed from within the browser web pages by clicking on the question mark in the upper right-hand corner of each page.
Fixes
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Session key is visible during Remote Console session initialization.
Customizing regional options can cause the application to stop working.
Application times out during video recording.
Startup and Pre-failure videos show no video in some instances.
Mounting a USB key that is labeled as “F:” drive causes the application to stop working.
High memory usage when virtual media runs for a long time.
Virtual media may disconnect unexpectedly.
Application occasionally stops working when the Share or Acquire dialog is closed.
The application becomes unresponsive after dismounting image file while server is rebooting.
Virtual USB key is not completely disconnected when the physical USB key is unplugged.
High CPU usage when local playback is paused.
Revision History
Version:1.3.3 (28 Sep 2017)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
Updated to support HPE Gen10 Servers.
Version:1.3.1 (11 Dec 2015)
Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.
This release fixes the following issues:
The IRC does not work correctly in .NET 3.5 without SP1.
The IRC might stop working when a virtual media URL is too long.
The IRC freezes when you access a video file that is in use.
This release includes the following enhancements:
Support for TLS 1.1 and TLS 1.2. Note: TLS 1.1 and TLS 1.2 require Windows 7 or later and .NET framework version 4.5 or later.
Enhanced security for communication between iLO and the IRC.
Japanese 101 keyboard support.
Improved the way that the IRC is closed due to an iLO reset or firmware update.
Improved handling of remote console sharing.
Version:1.2.3.0 (24 Jul 2014)
Upgrade Requirement: Recommended - HP recommends users update to this version at their earliest convenience.
Session key is visible during Remote Console session initialization.
Customizing regional options can cause the application to stop working.
Application times out during video recording.
Startup and Pre-failure videos show no video in some instances.
Mounting a USB key that is labeled as “F:” drive causes the application to stop working.
High memory usage when virtual media runs for a long time.
Virtual media may disconnect unexpectedly.
Application occasionally stops working when the Share or Acquire dialog is closed.
The application becomes unresponsive after dismounting image file while server is rebooting.
Virtual USB key is not completely disconnected when the physical USB key is unplugged.
High CPU usage when local playback is paused.
Added support for .NET Framework v4.0 and v4.5.
Added support for Simplified Chinese.
Added Offline Mode to allow local video playback without connecting to iLO.
Added “Caps Lock” entry to the Keyboard menu to allow synchronizing the Caps Lock keys between the client and remote server.
Added the Server Name, iLO FQDN, Enclosure name, and Bay number to the application title bar.
Added support for IPv6. Note: IPv6 support requires iLO 3 v1.50, iLO 4 v1.20 or later.
Version:1.1.2.0 (7 Apr 2011)
Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Initial release.
Ilo Mp3 Player
Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.